How to bleed your radiators for energy efficiency

'Bleeding radiators' is when you release air that has become trapped inside, improving the efficicency of your heating system. You can do it yourself — we'll explain how.

Beat the energy price rises

Three of the big six suppliers have already raised their prices following the Ofgem price cap increase. Don’t get caught out - switch to a fixed deal today!

Keeping your central heating system flowing smoothly means a warmer home and cheaper energy bills. To learn how to bleed your radiators, simply follow the steps below.

Beat the energy price rises

Three of the big six suppliers have already raised their prices following the Ofgem price cap increase. Don’t get caught out - switch to a fixed deal today!

How to bleed a radiator step-by-step

Step 1: Turn your heating on

Turn on the heating so that all radiators in your home come on.

Remember to wait until your radiators are fully heated before moving on to step two. You need to build up the pressure inside the radiator to be able to force the air out.

Step 2: Find out which radiators need bleeding

Once your radiators are hot, go and check each one individually to see if all parts of the radiator are warming up. Be careful - radiators can get very hot and you don’t want to burn yourself.

Cool spots, particularly toward the top of the radiator, mean that there could be air or gas trapped and that you’ll need to bleed that radiator.

Once you’ve found your cool spots it’s time to move onto step three and bleed them.

Step 3: Bleed the radiators

Switch off your central heating. This is reversing the process identified in step one and will allow you to handle the radiators without burning yourself or soaking your floor.

Bleeding radiators will require a radiator key (buy one at your local hardware store if you can’t find yours) or a flat-blade screwdriver.

At the top of the radiator at one end there will be a valve. You can attach the radiator key to the square bit in the centre or put the end of the screwdriver into the groove.

Hold the key or screwdriver with a cloth, and have another cloth ready to catch any drips, then slowly turn the radiator key or screwdriver anti-clockwise – if gas is escaping you’ll hear a hissing sound.

Once there is no more gas, liquid will come out and the valve will need to be closed quickly. With the more modern screwdriver operated escape valve, liquid is likely to emerge as a jet rather than a dribble.

Step 4: Check the pressure

Check the pressure by having a look at the gauge on your boiler. If the pressure is too low, you’ll need to ‘top up’. You can do this using the lever or tap on your boiler, known as the filling loop.

Afterwards, you may want to run another ‘hot test’ to check that your efforts have been successful. Simply turn your heating on, wait for all the radiators to heat up and check for any cool spots.

That’s it! Congratulations, now you know just how simple bleeding radiators can be!

Automatic radiator valves

Depending on what type of radiator you have it may be possible to automate the process of bleeding your radiators by using an auto vent.

Auto vents like the Aladdin are automatic radiator bleeders that attach to your valves. The vent lets out air gradually, increasing the effectiveness of your radiator and meaning your boiler doesn’t have to work so hard.

Remember you will need one auto vent per radiator.

How else can you improve your heating?

There are plenty of other gadgets and gizmos to improve the effectiveness of your heating. Radiator insulation foil for example is a simple way of ensuring your radiators heat your room, not your walls.

Insulation foil sits behind your radiator and reflects the heat they generate back into the room. They are widely available in hardware shops and you should be able to install them yourself.

A slightly more expensive option but still under the £25 mark is the radiator booster. This is essential a stretched fan unit that sits on tops of your radiators and pushes the warm air generated around your room. While the radiator booster will use electricity to run, they will save you more on your heating bills.

You should also make sure the heat being generated isn’t being wasted by keeping your home and rooms well insulated. The easiest thing you can do is check for draughts around windows and doors. You can also draught-proof things like chimneys and letterboxes, anywhere that heat could escape really.

While draught-proofing is relatively cheap and easy to install yourself you could save even more on heating by spending a bit more money. Loft and wall insulation are great ways to save on heating costs in the long run, but both require a significant upfront commitment of money.

To learn more and to see whether your home is suitable you can read our guides to loft insulation and our comprehensive guide to wall insulation in the insulation section of our site.

Read more…